200DLM/A Underwater TTL Housing for Olympus PEN E-PL7 Mirrorless Micro Four-Thirds Cameras

$636.65

A full featured and durable waterproof housing for Olympus PEN E-PL7 mirrorless micro four-thirds cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

Please call (877) 837-7637 to confirm availability

SKU: 6951.07 Categories: ,
 

Product Description

The True TTL Advantage

Other housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or “Through-The-Lens” flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes.

Fiber optic slave flash units require the camera’s flash to fire every time. This creates a shutter lag as you wait for the camera’s flash to recycle in between shots, drains your camera’s battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera’s flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water’s surface or your buddy’s flash going off.

The camera’s built-in flash is not usable in this installation. Non-Ikelite strobes may be attached with the appropriate sync cord and operate non-TTL (manual exposure modes only) with this housing.

The Lens Support You Want

It couldn’t be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.

This housing accepts a variety of ports to accommodate all of the most popular zoom, macro, and wide angle lenses. Our custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.

Lens port sold separately.

Viewing

The camera’s large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.

Ergonomics

Controls are put right at your fingertips for all important camera functions. Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use.

With a system of this caliber, a tray with handle is essential for the attachment of lighting and comfortable handling in a wide variety of shooting scenarios. This housing includes a balanced aluminum tray with our signature quick release handle for easy attachment and removal of strobes and video lights. This unique handle is curved slightly to fit the nature curvature of your hand, and features a soft over-mold which makes it a delight to hold. The complete tray and handle detaches with the removal of two nuts for packing or to attach the optional Tray with Dual Handles.

Construction

Special polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there’s no substitute for inspecting the actual o-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you’re diving. Unlike aluminum, polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.

Like every Ikelite product, our housings are designed, built, and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry.

This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.

Compatibility

Differences in lens and control placement prevent other Olympus PEN models from being used in this housing.

 

Specifications

200 ft (60m) depth rating

Compatible with DLM system lens ports

Controls for all important camera functions

Ikelite flash bulkhead connector with built-in TTL circuitry

Two 3/8-16 threaded tray mounts with 3-inch (76mm) spacing

Ikelite bulkhead connector with built-in TTL circuitry

Slightly negative buoyancy in fresh water

Actual buoyancy varies depending on choice of lens and port

3.2 lb (1447 g)

6.4 x 7.5 x 5.9″ (163 x 190 x 150 mm)

ABS-PC, acrylic, and acetyl construction

 

In the Box

Housing

Rear o-ring # 0110

Front o-ring # 0132.36

Waterproof bulkhead cap # 9104.5

Tray with left-hand quick release handle # 9523.63

Silicone lubricant # 0184.1

1 year limited warranty

Free Shipping Terms and Conditions:

  • Applies to orders greater than $50.00 on selected items. (Does not apply to tanks or weights)
  • Applies to UPS GROUND shipping rates only, within the Continental United States. Expedited shipping requests will be charged at applicable shipping rates.
  • Available only to the Continental United States.
  • Refunds for shipping on any returned items will be deducted by the amount charged for the non free shipped items only on the original order.
  • Valid with gift certificates & promotions.
  • We reserve the right to modify or cancel free shipping at any time.

Full Return Policy For Saguaro Products

New Product Returns: Save your receipt. Your purchase can be returned within 90 days for a hassle-free exchange or refund provided that the merchandise is in its original saleable condition, original packaging and it is returned with its original receipt. Returns without the original receipt will be made at Saguaro Scuba Inc. discretion. Specific details and exceptions are as follows:

Regular Stock Product Returns: Regular stock products can be returned within 90 days of purchase to Saguaro Scuba Inc. There is no restocking charge when returning regularly stocked merchandise.

Special Order Product Returns: Special order products can only be returned to the store within the time limit originally specified. Some special order products may have a restocking charge or may be non-returnable. In these cases we will inform you prior to ordering and we will note any special rules or restocking fees directly on your receipt.

Non-returnable Products: Computers, Electronics & Cameras are returnable only if they have not been installed or used and if they are in new original saleable condition and packaging. Clearance items are non-returnable.

Warranty Product Returns: Your purchase can be returned for a hassle-free replacement/repair provided that it is returned within the warranty terms and warranty period. The original receipt is required. Warranty returns without the original receipt will be made at Saguaro Scuba’s discretion. Products with a replacement warranty will be exchanged free of charge. Products with a repair only warranty will be repaired in accordance with the manufacturer’s or Saguaro Scuba Inc. terms and conditions. Warranty claims are limited to replacement/repair of the product only. We do not cover additional costs such as labor, incidental or consequential damages.

More Info

Weight 4 lbs
Dimensions 7 × 8 × 6 in
Brand

Reviews

There are no reviews yet.

Be the first to review “200DLM/A Underwater TTL Housing for Olympus PEN E-PL7 Mirrorless Micro Four-Thirds Cameras”